Filter
Top Products
How to Measure: Set the Personal Data
8
How to Measure
1. Turn on the power.
2. Set the personal data.
Push the On/Off button.
All displays turn on.
If you don’t want to set personal
data for each measurement:
Select the guest.
1) The display GUEST flashes.
Push the Set button.
The display GUEST changes
to NORMAL / ATHLETE selection mode.
2) Set the personal data (Refer to "Setting
of personal data").
When you want to set the personal number and
store the personal data:
Select the personal number.
1) When Guest is flasing, push the Up / Down
button and select a personal number from 1 to 9.
2) Push the Set button.
The personal No. turns on and changes
to NORMAL / ATHLETE selection mode.
3) Set the personal data (Refer to "Setting
of personal data").
When you have already set your personal
No. and stored your personal data:
Select your personal number
1) Push the Up / Down button to select your
personal number
2) Push the Set button.
The personal No. turns on and the personal
data is displayed.
3) Start the measurement (Refer to "Start
the measurement").
Push