Filter
Top Products
How to Replace the Mesh Cap
19
How to Disinfect How to Replace the Mesh Cap
1 Open the Mesh Cap.
2 Remove the Mesh Cap from the
Medication Bottle.
3 Install a new Mesh Cap.
You can usually use the Mesh Cap for approximately 1 year (according to the test results of OMRON).
However, this may vary depending on medication type and individual use and care. In some cases,
the unit may not nebulize or may nebulize weakly even after disinfection is done.
If the unit does not nebulize or nebulizes poorly even after cleaning the Mesh Cap,
purchase a new Mesh Cap from your nearest Omron dealer or where you purchased your unit from.
The part number is U22-4.
Lift up the Mesh Cap
by strongly applying
your thumb on the brim.
Insert a new
Mesh Cap
vertically.
Close it
securely.
Lift up the
Mesh Cap
vertically.