Filter
Top Products
25
3. Using the Unit
EN
If “E” or “EE” is displayed
Measurement could not be completed
successfully. (Refer to Chapter 4.1.)
Wait 2-3 minutes before taking another measurement.
Waiting between measurements allows the arteries to return to the
condition prior to taking the blood pressure measurement. Repeat the
measurement after your arm is relaxed again. (Refer to Chapter 3.3.)
7. Remove your arm and return
the arm cuff to its original
position.
The arm cuff will click into
place.
8. Press the O/I button to turn the power off.
Note: If you forget to turn the power off, the unit will turn itself
off automatically after five minutes.