Filter
Top Products
24
3. Using the Unit
6. Check the measurement results.
The measurement results are
automatically stored in the memory.
(Refer to Chapter 3.5.)
Note: If “G” (Guest) was selected,
the measurement results are
not stored in the memory.
Warning:
Self-diagnosis of measurement
results and self-treatment are
dangerous. Always follow the
instructions of your doctor.
If the or symbols are displayed
Please repeat measurement. In some cases it may not be possible to
take measurement correctly.
SYS
DIA
Pulse
• If is displayed
Incorrect posture during measurement.
Sit correctly and take the measurement
again. (Refer to Chapter 3.3.4.)
Note: The symbol will disappear in a few
seconds, but may appear again
depending on the cuff angle at the
time.
• If is displayed
Movement during measurement.
Keep still and repeat the
measurement.