Filter
Top Products
23
3.Using the Unit
EN
Notes:
• If the reinflation symbol ( ) appears, squeeze the inflation
bulb to re-inflate the arm cuff.
• Do not inflate the arm cuff more than necessary.
3. Measurement starts.
Measurement starts
automatically after you stop
inflating the arm cuff. Decreasing
numbers appear on the display
and the heartbeat symbol
flashes.
Remain still and do not talk
during measurement.
Note: To cancel a measurement, press the I/O button to turn
off the unit and press the air release button to release
the air in the arm cuff.
4. Measurement ends.
When the measurement is finished,
the deflation symbol flashes on the
display. Blood pressure and pulse
rate values are displayed.
Press the air release button to
release the air in the arm cuff until
the deflation symbol is no longer
displayed.
HEM-4500-SOLE_main.book Page 23 Tuesday, February 3, 2009 1:30 PM