Filter
Top Products
19
3.Using the Unit
EN
3.2
Applying the Arm Cuff
Notes:
• Be sure to wrap the arm cuff correctly so that you get accurate results.
• Measurements can be taken in light clothing. However, please remove
thick clothes, such as sweaters, before taking a reading.
• You can take a measurement on either your left or right arm. The
blood pressure can differ between the right arm and the left arm and
therefore also the measured blood pressure values can be different.
Omron recommends to always use the same arm for measurement. If
the values between the two arms differ substantially, please check
with your doctor which arm to use for your measurement.
Taking measurements on the left arm
1.
Open two Air connector caps, then insert the air plugs of the arm
cuff and the inflation bulb into their respective air connectors.
Note: Be sure to use the appropriate size arm cuff. Should
you require a small cuff, ensure that the small bulb is
used together with the small cuff. Please refer to
Chapter 7.
HEM-4500-SOLE_main.book Page 19 Tuesday, February 3, 2009 1:30 PM