Filter
Top Products
33
8.Error Displays
EN
Care and maintenance
8. Error Displays
Error Display Cause Correction
Your palms or soles are not in firm
contact with the electrodes.
Press your palms or soles firmly to
the electrodes, then measure.
(Refer to Section 5.)
The posture for measurement is
wrong or the palms or soles are not
in firm contact with the electrodes.
Measure without moving the hands
or soles. (Refer to Section 5.)
The palms or soles are too dry.
Moisten the palms or soles with a
wet towel, then repeat
measurement. (Refer to Section 5.)
Values of body composition are out
of measurable range.
Please ensure that your personal
data is within the measurable range
of the device. (see Section 11).
Abnormal operation.
Insert the batteries again and
repeat measurement.
If this error still occurs, consult your
OMRON service representative.
You stepped on the unit before the
display indicated 0.0 kg.
Step on the main unit after the
display indicates 0.0 kg.
You moved the main unit before the
display indicated 0.0 kg.
Do not move the main unit until the
display indicates 0.0 kg.
You moved your body while
measuring body weight.
Do not move while measuring body
weight.
Your weight is 135 kg or over.
Body weight of 135 kg or over is out
of the measuring range of this unit.
You cannot use this unit.
HBF500-E.book Page 33 Friday, October 24, 2008 10:41 AM