Filter
Top Products
27
6.Measuring Weight Only
EN
6. Measuring Weight Only
1. Turn on the power, by pressing the power switch.
“CAL” blinks on the display, then the display changes to
0.0 kg.
Notes:
• If you step onto the unit before 0.0 kg appears on the
display, an error message “Err” will appear.
• You can change the measurement units used for the height
and weight settings. To change the measurement unit:
1) Keep the
button pressed until “lb” and “kg” blink on
the display.
2) Press the
or button to select the desired measurement unit, “lb” or “kg”. This will
automatically change “cm” and “in”.
3) Press the SET button to confirm the change.
2. When the 0.0 kg appears on the display, step onto
the unit.
3. Check the measurement results.
Your weight is displayed on the display and blinks twice to
indicate that measurement is complete.
Note: You can also check the measurement result by taking
out the display unit.
4. When the measurement is completed, step down from the unit and turn off the
power.
Example: Weight 73.8 kg
HBF500-E.book Page 27 Friday, October 24, 2008 10:41 AM