Filter
Top Products
ANALOG OUTPUT (if applicable)
Signal type: Current or voltage
Signal level: Current: 10 V max compliance at 20 mA output
Voltage: 20 mA max for 0-10 V output
Function: May be assigned to a display range or proportional
control output with setpoint #1 when used as a
control output.
Linearity: 0.2%
Load Regulation: 1.1%
Line Regulation: 0.02% /V ac
Step Response Time: 2 - 3 seconds to 99% of the final value
ALARM OUTPUTS (if applicable)
2 Form "C" on/off relays. Configurable for latched and unlatched by software.
Max current: 5 AMPS, resistive load.
Max voltage: 250 V ac or 30 V dc
ISOLATED ANALOG OUTPUT (TB5, if applicable)
Same as non-isolated analog output except isolated to 1000 Vdc.
Signal Type: Current or voltage
Signal Level: Current: 10 V max compliance at 20 mA output
Voltage: 20 mA max for 0-10 V output
Function: May be assigned to a display range or proportional
control output with setpoint #1 when used as a
control output.
Linearity: 0.2%
Step Response Time: 2 - 3 seconds to 99% of the final value
Only one analog output is available on each unit and it must be factory installed.
51