Filter
Top Products
PREFACE
Manual Objectives
This manual shows you how to set up and use the Differential RTD Meter.
Standard Procedures:
* Checking voltage jumpers, or changing voltage power
* Mounting the panel
* Selecting the input type
* Selecting a decimal point position
* Selecting reading configuration (Fahrenheit or Celsius)
* Setting setpoint configuration
* Setting setpoint deadbands
* Entering temperature offset
* Accessing the deviation mode
* Selecting meter display
Optional Procedures:
* Enabling/disabling analog output
* Selecting analog output as current or voltage
* Selecting analog output or proportional control
* Routing analog output
* Selecting proportional band
* Using manual reset (offsetting setpoint errors)
* Scaling analog output
For first-time users: Refer to the QuickStart Manual for basic operation and
set-up instructions.
i