Filter
Top Products
Using the Infrared Thermometer/Transmitter
3
3-24
3.5.10 Erasing the Temperature Data from Memory
The user can erase all 100 temperature data points in
memory at any time by using the following procedure:
1. With power applied to the unit, place the SLEEP/ON
switch to the ON position.
2. Press the key. The icon will appear.
3. Place the SLEEP/ON switch to the SLEEP position.
4. Press the key and then the key in rapid
sequence.
The display freezes momentarily, and a beep
sounds for about 1 second. Now the memory is
cleared. The thermometer reverts to real time mode.
NOTE
If the icon disappeared, repeat
Steps 1 and 2.
NOTE
Erasing the temperature data does not erase or
reset your pre-set Emissivity, High and Low Alarm
setpoints, printing interval, and Ambient Target
Temperature compensation.