Glossary of Key Strokes
9
9-1
Key(s) Key(s) Functions
• Selects one of the following Display
Modes:
E , d-F, d-M, MAX, MIN, dIF, AVG, TC,
HAL, LAL, AMB, PRN, MEM or LOG.
• Locks/unlocks the trigger.
• Enables/disables High & Low Alarm.
• Enables/disables Target Ambient
Temperature Compensation.
• Enables/disables sending data to the
personal computer or serial printer.
• Stores temperature data on command.
• Displays previously stored data.
• Resets Min, Max, AVG values
• Increments the data or value displayed.
• Turns on or off the backlighting (only in
MAX, MIN, dIF, TC or AVG Display
Modes).
• Decrements the data or value displayed.
• Changes the unit of measure from °F to
°C or vice versa (only in MAX, MIN, dIF,
TC or AVG Display Modes).
Press the key & • Allows you to go to the Diagnostic
the key together Routine.
Press the & • Allows you to erase all 800 stored
the keys together temperature data from the memory.
Press and Hold Key • Reset the thermometer. It sets all
Pull the trigger parameters to default values.
Release trigger
Release Key
F
C
F
C
LOCK
LOCK
FUNC
F
C
LOCK
FUNC