Filter
Top Products
23
PATENTS PENDING
9. Lower the PLATFORM as follows.
Re-enter the vehicle to access Manual
Pump. Open pressure release valve
on Manual Pump by turning MANUAL
BACKUP HANDLE counter-
clockwise (FIG. 23-4). Start with
1/4 turn and slowly increase to
1/2 turn counter-clockwise. Lower
the Lift slowly below floor level
and check if Inboard Rollstop
raises up all the way.
OPEN PRESSURE
RELEASE VALVE
FIG. 23-4
6. Ensure OUTBOARD
ROLLSTOP is raised up all
the way (FIG. 23-1).
OUTBOARD ROLLSTOP
RAISED UP
FIG. 23-1
7. If equipped, make sure
SEAT BELT is fastened
(FIG. 23-2) with 3” - 4” of
slack in belt.
FASTENING SEAT BELT
FIG. 23-2
8. Position wheelchair or
ambulatory occupant on
the center of Platform
(FIG. 23-3).
SET WHEELCHAIR
BRAKES OR SWITCH
OFF POWERED
WHEELCHAIR.
POSITIONING OCCUPANT
ON PLATFORM
FIG. 23-3
NOTE: If there are no occupants to unload
from vehicle, skip step 8.
OUTBOARD
ROLLSTOP
1/4 - 1/2 TURN