Filter
Top Products
22
PATENTS PENDING
MANUAL PUMP OPERATION - Continued
2. Remove the MANUAL
BACKUP HANDLE from
clips on the Pump Cover
(FIG. 22-1).
4. Observe the PLATFORM
unfolding to horizontal
position at vehicle floor
level (FIG. 22-3).
UNFOLD PLATFORM
FIG. 22-3
MANUAL BACKUP HANDLE
(LH PUMP SHOWN)
FIG. 22-1
PUMP
COVER
HANDLE
3. Unfold the PLATFORM as
follows. Open pressure
release valve on Manual
Pump by turning MANUAL
BACKUP HANDLE counter-
clockwise (FIG. 23-2).
Start with 1/4 turn and
slowly increase to 1/2 turn
counter-clockwise.
OPEN PRESSURE
RELEASE VALVE
FIG. 23-2
1/4 - 1/2 TURN
5. When the PLATFORM reaches
floor level, close pressure release
valve on Manual Pump by turning
MANUAL BACKUP HANDLE
clockwise until tight (FIG. 23-4).
CLOSE PRESSURE
RELEASE VALVE
FIG. 23-4
TIGHTEN
OPERATING INSTRUCTIONS - Continued