Filter
Top Products
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Armature
[3] -3. Yoke unit
DISASSEMBLING
ASSEMBLING
(3) Disassemble Carbon brushes and Armature as drawn in Fig. 6.
Fig. 6
Fig. 7
1. Remove Holder cap cover by levering it up
with a slotted screwdriver.
3. Separate Gear housing complete from Housing set by unscrewing
four 4x20 Tapping screws.
2. Remove Brush holder caps and Carbon brushes.
Holder cap cover
Holder cap cover
Holder cap cover
Carbon brush
Carbon brush
Brush holder caps
4x40 Tapping screw
(4 pcs.)
Gear housing
complete
notch
Yoke unit
Assemble Yoke unit to Housing L while aligning the notch of Yoke unit to the projection on Housing L. (Fig. 7)
Housing L
projection
4. Pull off Armature from
Housing set.
Armature
Armature
P 5/ 8
Repair