Filter
Top Products
29
æ
CAUTION: Do not swallow control solution; it is not for human consumption.
Do not apply control solution to the skin or eyes as it may cause irritation.
Control solution testing
Performing a control solution test
Start with the meter off. If you have turned the meter on to
change settings or review past results, turn it off.
Step 1
Check the code on the test strip vial before inserting
the strip
Step 2
Insert a test strip to turn on the meter
Make sure the three contact bars are facing you. Push the strip
in as far as it will go. Do not bend the strip.
DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 29