Filter
Top Products
Applying blood and reading results
After getting a result
Once you have read your result, you may:
• Review your meter memory by pressing ▼ to enter memory mode,
see page 27, or
• Turn the meter off by removing the test strip.
Removing the used lancet
Remove the lancing device cap by snapping it off. Cover the
exposed lancet tip before removing the lancet. Place the lancet
protective disk on a hard surface. Push the lancet tip into the disk.
Remove the lancet and place it in a container for sharp objects.
Replace the cap.
Disposing of the used lancet and test strip
It is important to discard the used lancet carefully after each use to
avoid unintended lancet stick injuries. Used test strips and lancets
may be considered biohazardous waste in your area. Be sure to
follow your local regulations for proper disposal.
26
DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 26