Filter
Top Products
27
Reviewing past results
The meter stores a maximum of 50 blood glucose test results. When the meter memory is full,
the oldest result is dropped as the newest is added. Results are stored automatically when you
test, along with the time, date and unit of measure. You can review the results stored in the
meter memory, starting with the most recent.
If your meter is off, press and release ▼ to turn it on.
After the start-up test screen, your most recent test
result will appear on the display. “M” also appears to
indicate memory mode.
If you have just completed a test, leave the test strip
in the meter and press
▼
to enter the memory mode.
Your most recent blood glucose test result appears
along with “M”.
Press ▼ to move to the previous result stored in the
meter. Then, press ▲ or ▼ to move forward or
backward through all of your results. When you’re
finished reviewing past results, press and hold ▼ for
two seconds until the meter turns off.
NOTE: If no results are currently stored in the meter, “–––” will appear on the display.
DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 27