Leica S6 T Microscope & Magnifier User Manual


 
Read the instructions for use and safety instructions before putting the
stereomicroscope into operation.
Leica S4 E, S6 E, S6, S6 T, S6 D and S8 APO stereomicroscopes are precision
optical instruments for making technical and scientific objects, object details
or specimens more easily visible by means of magnification. Stands, illumi-
nators and accessories complete the equipment.
Use of the instrument other than in the manner described in these
instructions could result in personal injury or material damage.
The Leica S series stereomicroscopes must not be used for examining
and operating on the eye.
Never fit other equipment connectors or dismantle optical systems
and mechanical parts unless the user manual gives express instructions
for doing so.
The Leica S4 E, S6 E, S6, S6 T, S6 D and S8 APO stereomicroscopes are
intended primarily for indoor use.
If used outdoors the stereomicroscope must be protected against dust
and moisture. Leica Microsystems electric illuminators and stands must
not be used outdoors.
The following must be observed when installing Leica products in third-party
products:
The manufacturer of the basic system or the person putting the product into
circulation is responsible for compliance with existing safety regulations,
laws and directives.
The Leica S series can be used in clean rooms without any problems and
they can be cleaned as described on page 35. Please observe the following
rules:
Do not clean our stereomicroscopes and accessories in a different
manner from that described in this user manual. Do not use unsuitable
cleaning agents, chemicals and techniques. Do not clean painted
surfaces and accessories with rubber parts with chemicals.
This can damage the surfaces. Particles or grindings can contaminate
the specimen.
If the customer cleans our instruments with chemicals without our
written approval he will do it at his own risk.
In most cases we can offer special solutions on request. Some products
can be modified or we could recommend other accessories for use in
clean rooms.
Repair work must only be carried out by service engineers trained by Leica
Microsystems. Only original spare parts from Leica Microsystems are to be
used.
Make sure that personnel using this stereomicroscope have read and
understood these instructions, especially the safety instructions.
Take steps to ensure that Leica S4 E, S6 E, S6, S6 T, S6 D and
S8 APO stereomicroscopes are only operated, serviced and repaired
by authorized and trained personnel
.
General instructions
Intended application
Improper use
Place of use
Istallation in
third-party products
Use in Clean Rooms
Service work
Obligations of the
operator
4
Leica StereoZoom User Manual
Safety rules