Filter
Top Products
23
• Pay great attention when setting up your stereomicro-
scope. You will only benefit fully from the outstanding
optical and ergonomic advantages of the instrument if
you set it up precisely in accordance with the
directions already given.
• Arrange your workplace as well as possible, and pay
attention to the heights of chair and table.
• When sitting, use the entire seat area and also the
back support of the chair.
• Support your forearms.
• During work breaks, stand up and move around for
exercise.
Please also observe the note on p. 5.
The achromatic ErgoLenses for Leica S4E and the S6
models ensure an ergonomic, fatigue-free head position.
The 0.6x – 0.75x ErgoLens with variable working distance
of 77 – 137 mm and the 0.7x – 1x ErgoLens with variable
working distance of 48 mm – 98 mm permit fine adjust-
ment of magnification, working distance, as well as
viewing height without time-consuming lens changes.
Leica S6 with 60° viewing angle offers optimal comfort at
the tilted stereomicroscope.
The interpupillary distance can be
adjusted from 55–75mm.
The exit pupil is the distance
between the eye and eyepiece.
It is
– 12mm on the 10×/23,
16×/16 and 20×/12 low eyepoint
eyepieces
– 22mm on the 10×/23,
16×/15B, 25×/9.5B and 40×/6B
high eyepoint eyepieces for
spectacle wearers
̈ Carefully put your eyes against
the eyepieces and push the
eyepiece tubes together or
apart until with both eyes you
can see a single shadow-
free circular field.
Preconditions for
working comfortably
Ergonomic viewing
Interpupillary
distance and
exit pupil
55
75
12 / 22
Leica StereoZoom User Manual – Operating