Filter
Top Products
Leica RM2125 Troubleshooting Guide
Problem
2. Compressed sections (sections are extremely compressed,
wrinkled or jammed together)
(continued)
a) Compressed
b) Wrinkled
c) Jammed
Cause(s) / Corrective Action
VII) Knife blade is not parallel with pressure plate. (cont.)
l) Adjust Pressure Plate with set screws at the bottom of the knife holder (turn counter clockwise or clockwise) until the blade is parallel with the top of the pressure plate.
m) When the blade is parallel with the pressure plate, the base line of the blade should line up with the top of the pressure plate after being clamped.
VIII) Insufficient tension of handwheel.
n) While manually turning, rotate the handwheel 5 times and release your hand from the handwheel. If the handwheel rotates freely more than 3 times,
adjustment is needed. Schedule a service call.
4
back to Table of Contents