Konica Minolta PULSOX-300i Oxygen Equipment User Manual


  Open as PDF
of 40
 
28
Check Points
Maintenance and Inspection
•
Before using the instrument, make sure that there is no dam-
age to the instrument, no damage or wire-breakage in the
probe cable and the instrument operates correctly and safely.
Cleaning
• Dampen a soft cloth with neutral detergent or water, wipe
the instrument with it, then wipe off carefully with a dry cloth.
In this way, make sure the instrument is cleaned and never
use solvent. When cleaning, take care not to touch the con-
nector terminals. Touching them may break terminal pins,
resulting in breakdown or damage.
Check Points before repairing
Before taking any actions, check the following points rst.
◆
If the abnormality continues to reappear, the instrument might
be faulty, so contact the nearest distributor or authorized service
facility.
.ODISPLAY
APPEARSWHEN
THE0OWERIS
TURNED/.
q $ISPLAY
DISAPPEAREDIN
THEMIDDLEOF
MEASUREMENTS
)SBATTERYPOWER
EXHAUSTED
4URNTHE0OWER/&&AND
REPLACETHEBATTERY!!!SIZE
WITHNEWONE
)SBATTERYORIENTED
CORRECTLY
-AKESURETHATTHEBATTERY
AREORIENTEDCORRECTLY
)SN TSETTHEAUTO
POWEROFFTIMERBY
USINGTHEOPTIONAL
SOFTWARE
q)FTHEAUTOPOWEROFFTIMER
SETTHE0OWERISTURNEDOFFIN
THESETTIMEAFTERTHEPOWER
HADBEENTURNED/.
 previous next