Filter
Top Products
14
Preparations
2) Connecting the probe
Connect the probe’s connector
plug into the Probe Connector
on the instrument.
◆
Make sure that probe’s
connector plug is oriented
correctly.
◆
Do not connect it in with
excessive force. Doing so may
damage the connector.
◆
Do not touch the connector
terminals by hand. Contact
failure may occur.
<When using the Extension Cable EC-300>
Connecting the extension cable EC-300 between the PULSOX-300i
and the probe extends the probe cable to a total length of 1m.
Extension Cable EC-300 (1m)