Filter
Top Products
Part No. 1118395 43
®
TRANSPORTING THE SCOOTER (FIGURE 1)
DISASSEMBLING
1. If installed on scooter, remove the front basket. Refer to REMOVING/INSTALLING
THE FRONT BASKET in SECTION 10 of this manual.
2. Remove the seat. Refer to REMOVING/INSTALLING THE SEAT in SECTION 4 of
this manual.
3. Remove the rear shroud. Refer to REMOVING/INSTALLING THE REAR SHROUD
in SECTION 7 of the manual.
4. Remove the batteries. Refer to REPLACING THE BATTERIES in SECTION 8 of this
manual.
5. Fold tiller down to lowest locked position. Refer to TILLER ANGLE ADJUSTMENT
in SECTION 6 of this manual.
ASSEMBLING
1. Unfold tiller. Refer to TILLER ANGLE ADJUSTMENT in SECTION 6 of this manual.
2. Install the batteries. Refer to REPLACING THE BATTERIES in SECTION 8 of this
manual.
3. Install the rear shroud. Refer to REMOVING/INSTALLING THE REAR SHROUD in
SECTION 7 of the manual.
4. Install the seat. Refer to REMOVING/INSTALLING THE SEAT in SECTION 4 of this
manual.
5. If desired, install the front basket. Refer to REMOVING/INSTALLING THE FRONT
BASKET in SECTION 10 of this manual.
SECTION 9TRANSPORTING
TRANSPORTING
Section 9 - Transporting - includes the following:
Transporting the Scooter
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that
all attaching hardware is tightened securely; otherwise serious injury or
damage may result.