Invacare FDX-CG Mobility Aid User Manual


 
5 WHEELCHAIR OPERATION
Invacare® FDX®
52 Part No 1163181
SPJ+, SPJ+ w/PSS and SPJ+ w/ACC Joysticks
The Information Gauge Display located on the front of the joystick
housing, it provides the state-of-battery charge, including notification of
when the battery requires charging. It also provides the following
information to the user on the status of the wheelchair:
A. GREEN LEDs are lit, indicating well charged batteries.
B. AMBER LEDs are lit, indicating batteries are moderately
charged. Recharge batteries before taking a long trip.
C. RED LEDs are lit, indicating batteries are running out of
charge. Recharge batteries as soon as possible.
FIGURE10 SPJ+, SPJ+ w/PSS and SPJ+ w/ACC Joysticks
MPJ+ Joystick
The far right side of the display screen is the Battery Gauge Display
(BGD). It provides information on the remaining charge in the batteries.
At full charge, solid blocks fill in battery gauge. As the battery becomes
discharged, the segments will progressively disappear starting on the
right and moving towards the left a bar at a time until no segments
appear. At this level the user should charge the batteries as soon as
possible.
FIGURE11 MPJ+ Joystick
For this procedure, refer to FIGURE10.
Battery Charger/
Programming Port
Batteries Full
Batteries
Empty
Information Gauge Display
For this procedure, refer to FIGURE11.
Battery Gage
Display
Display Screen
Batteries Full
Batteries Empty