Invacare FDX-CG Mobility Aid User Manual


 
5 WHEELCHAIR OPERATION
Part No 1163181
45 Invacare® FDX®
Main Screen
During normal operation, the active drive is displayed in the upper half of the LCD display. Battery charge level is shown in the Battery Gauge Display
(BGD) located on the right side of the LCD display. At full charge, solid blocks fill in all ten segments between E (Empty) and F (Full). As the battery
becomes discharged, the top most segments will progressively disappear until no segments appear between E and F. At this level, the user should
charge the batteries as soon as possible.
The lower half of the LCD display is the Information Center. The Information Center displays current data on the wheelchair.
Refer to LCD Display
table on page 45 for descriptions of information shown.
LCD DISPLAY
For this procedure, refer to FIGURE7 on page 47.
ITEM DESCRIPTION
DRIVE NAME This field shows the currently selected Drive’s Name.
Available choices are as follows:
*NOTE: Drive names can be customized. Actual drive names may display differently.
Drive 1* Drive 2*
Drive 3*
Drive 4* “No Drive” selected
via the programmer
BATTERY
LEVEL
INDICATOR
This symbol shows the Battery Level and will change depending on the available battery power.
This indicator is shown on every screen.
STATUS
MESSAGE
This area displays status or instructions.