Filter
Top Products
8 SETUP/MAINTENANCE
Invacare® FDX®
90 Part No 1163181
MPJ+ Joysticks
Disconnecting
1. Pull the latch away from the joystick connector.
2. Disconnect the joystick connector from the remaining connectors
Connecting
1. Ensure the latch is pulled away from the network connector.
2. Connect the network connector to the other connectors.
3. Top and Bottom Connectors - Install connector caps onto the
network connector.
4. Push the latch in to secure the network connectors and caps.
5. If necessary secure excess cable using tie-wraps.
FIGURE9 Disconnecting/Connecting the Joysticks -
MPJ+ Joysticks
For this procedure, refer to FIGURE9.
Ensure the gaskets are installed in the top
connector cap and between network connectors.
Top Connector
Cap
Latch
Gasket
Network
Connectors
Gasket
Controller
Cable
Gasket
Bottom
Connector
Cap