Invacare FDX Mobility Aid User Manual


 
5 WHEELCHAIR OPERATION
Invacare® FDX®
36 Part No 1163181
5 Wheelchair Operation
5.1 Preparing the Joystick for Use
1. Turn the adjustment lock lever to release the adjustment lock from
joystick mounting tube.
2. Slide joystick mounting tube to the desired position.
3. Turn the adjustment lock lever to secure the adjustment lock to the
joystick mounting tube.
FIGURE1 Preparing the Joystick for Use
ƽ
WARNING
After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely -
otherwise injury or damage may result.
Set-up of the Electronic Control Unit is to be performed only by a qualified technician. The final adjustments of the
controller may affect other activities of the wheelchair. Damage to the equipment could occur under these circumstances.
For this procedure, refer to FIGURE1.
The joystick is factory installed on the right side of
the wheelchair. To reposition the joystick onto the
left side of the wheelchair, refer to Repositioning
Joystick on page 88.
Joystick not shown.
Joystick Mounting
Tube
Adjustment Lock Lever