Filter
Top Products
8 SETUP/MAINTENANCE
Invacare® FDX®
88 Part No 1163181
8.10 Repositioning Joystick
1. Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket.
2. Remove the joystick from the wheelchair.
3. Remove the three hex screws that secure both halves of the mounting bracket to the arm tube.
4. Reposition mounting bracket on opposite arm tube ensuring the threaded plate of the mounting bracket is on the inside of the arm tube as shown
in FIGURE7.
5. Using the three hex mounting screws and washers, secure both halves of the mounting bracket to the arm tube.
6. Slide the joystick mounting tube through the mounting bracket to the desired position.
7. Turn the adjustment lock lever to secure the joystick mounting tube into the mounting bracket.
FIGURE7 Repositioning Joystick
For this procedure, refer to FIGURE7.
This procedure must be performed by a qualified technician.
Washers
Hex Mounting
Screws
Mounting Bracket
Adjustment Lock
Lever
Joystick
Mounting
Tube
Mounting
Bracket
(Threaded
Plate)
Arm Tube
Joystick not shown.