Filter
Top Products
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
At’m 22 Part No. 1125035
INSPECT/ADJUST WEEKLY
❑ Check pneumatic tires for proper inflation.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Inspect tires for flat spots and wear.
INSPECT/ADJUST MONTHLY
❑ Ensure no excessive side movement or binding occurs when drive wheels are lifted
and spun when disengaged (freewheeling).
❑ Ensure caster assembly has proper tension when caster is spun. Caster should come
to a gradual stop.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Inspect for any loose hardware on the wheelchair.
❑ Inspect the seat positioning strap for signs of wear. Replace if worn or damaged.
❑ Ensure that the buckle on the seat positioning strap latches. Replace if necessary.
❑ Verify that the hardware that attaches the seat positioning strap to the seat frame is
secure and undamaged. Replace if necessary.
INSPECT/ADJUST PERIODICALLY
❑ Ensure all clothing guard fasteners are secure.
❑ Clean seat upholstery and armrests.
❑ Ensure armrest pads sit flush against arm tubes.
❑ Ensure seat is secured to wheelchair frame.
❑ Ensure seat release latches are functional. Replace if necessary.
❑ Inspect seat upholstery for rips or sagging.
❑ Inspect charger AC power cord for damage. Replace if necessary.