Filter
Top Products
41
Spacer
Spacer
21-INCH FRAME FRONT SEAT-TO-FLOOR HEIGHT
NOTE: The seat-to-floor heights are based on pneumatic tires and pneumatic tires with flat free inserts. If wheelchair
is equipped with urethane tires, subtract 1/2-inch from the measurements listed below. All heights are approximate
to
+1/4-inch due to tire wear and air pressure.
* NOTE: Anti-tippers are available in two (2) sizes - “A” and “B”. Note the size shown in the chart below.
22 24 26
N/A B B
22 24 26
N/A B B
22 24 26
N/A B B
22 24 26
N/A B B
22 24 26
N/A B B
22 24 26
N/A B B
W
H
E
E
L
S
PROCEDURE 5WHEELS
FRONT CASTER AXLE REAR WHEEL SIZE
SEAT-TO-FLOOR SIZE AND TUBE
HEIGHT POSITION POSITION ANTI-TIPPER SIZE* AND POSITION
20-INCHES 3-INCH TOP
UPPER Two (2)
Mounting Holes
20-INCHES 5-INCH TOP
UPPER Two (2)
Mounting Holes
21-INCHES 3-INCH MIDDLE
LOWER Two (2)
Mounting Holes
21-INCHES 5-INCH MIDDLE
LOWER Two (2)
Mounting Holes
21.5-INCHES 6-INCH BOTTOM
LOWER Two (2) Mounting Holes
INVERTED CAMBER CLAMPS
22-INCHES 5-INCH BOTTOM
LOWER Two (2) Mounting Holes
INVERTED CAMBER CLAMPS