Filter
Top Products
OPERATING THE BATH LIFT
Traverse Lift/Transporter 18 Part No. 1150696
Using the On-Board Battery Charger
NOTE:Forthisprocedure,refertoFIGURE 2.10.
CAUTION
If the charging cord is not locked into the battery charge port the battery will not
charge fully.
Always unplug the charging cord from the battery charge port before wheeling the
lift away. Otherwise, damage to the charging cord will occur.
1. Plugthechargingcordintothebatterychargeportbyperformingthefollowingsteps:
A. Insertthechargingcordintothebatterychargeport.
B. Rotatethechargingcordtolockitintothebatterychargeport.
2. PresstheswitchtotheChargeposition.
3. Plugthebatterychargerintoapoweroutlet.
4. Chargethebattery.
5. Performthefollowingstepstodisconnectthechargingcordfromthebatterycharge
port:
A. Rotatethechargingcordtounlockitfromthebatterychargeport.
B. Removethechargingcordfromthebatterychargeport.
6. PresstheswitchtotheLiftposition.
FIGURE 2.10 Using the On-Board Battery Charger
Battery
Charge Port
Switch
LIFT
Position
(Down)
CHARGE Position (Up)
Battery
Charger
Charging Cord