Filter
Top Products
System Release 6.0 cPCI Feature Pack 1 for Windows — September 2004 14
• Setting DTMF transfer mode on a per call basis
• IP Precedence ToS (ToS byte)
• Multicast
• Interoperable with CISCO 5300 running IOS 12.3(1)
3.6 New Features for Intel NetStructure DM/V and DM/V-
A Boards
The Intel
®
NetStructure™ DM/V and DM/V-A boards are based on the DM3 architecture.
DM/V-A boards provide enhanced media in addition to 0, 2 or 4 trunks. DM/V boards
provide basic voice in addition to 4 trunks. Both boards provide voice processing on a
single-slot cPCI chassis.
New Features
The following new Intel NetStructure DM/V features are introduced in this release.
• Ability to restart a single trunk of DM/V products
• ETSI compliant Frequency Shift Keying (FSK). For more information, see the
Documentation Updates section in the Release Update document for this system
release.
• Configurable FSK Transmit and Receive Signal Level. Refer to the section, “Setting
the FSK Transmit and Receive Signal Level”, in the Intel NetStructure for DM3
Architecture for cPCI on Windows for more information
• Support for Global Call Alarm Management System (GCAMS). Refer to the Global
Call E-1/T-1 CAS/R2 Technology User’s Guide and Global Call ISDN Technology
Guide for more information.
• 8 KHz linear PCM coder supported at 64 Kbps (8 bits) and 128 Kbps (16 bits) for play
and record, VOX and WAVE file formats. For more information, see the
Documentation Updates section in the Release Update document for this system
release.
• Activate and de-activate Layer 2 (D-Channel). The Global Call API can now be used
to set the logical data link (D-channel) state using the gc_Extension( ) function with
extension ID (ext_id) of GDIS_EXID_SETDLINKSTATE. For more information, see the
Global Call ISDN Technology Guide.
• Media Load 9F (120 channels of rich conferencing, in addition to 15 channels of fax)
available on DM/V2400AcPCI. Refer to the Intel NetStructure for DM3 Architecture for
CompactPCI on Windows for more information.
• Ability to dynamically turn CRC4 on/off
• Clear Channel support for the DMN1200-4E1-cPCI & DMN960-4E1-cPCI boards.
Refer to the Intel NetStructure for DM3 Architecture for cPCI on Windows for more
information.