Filter
Top Products
3029
CARE, MAINTENANCE & CLEANING
1. Clean the blood pressure monitor body
and cuff carefully with a slightly damp,
soft cloth. Do not press. Do not wash
cuff or use chemical cleaner on it.
Never use thinner, alcohol or petrol
(gasoline) as cleaner.
2. Leaky batteries can damage the unit.
Remove the batteries when the unit will
not be used for a long time.
3. If the unit is stored near freezing, allow
it to acclimate to room temperature
before use.
4. This blood pressure monitor is not field
serviceable. You should not use any
tool to open the device nor should you
attempt to adjust anything inside the
device. If you have any problems with
this device, please contact HoMedics
Consumer Relations (contact informa-
tion on warranty page).
5. Do not immerse the unit in water as
this will result in damage to the unit.
6. Do not subject the monitor and cuff to
extreme temperatures, humidity,
moisture, and direct sunlight. Protect
from dust.
7. Do not fold the cuff tightly.
8. Do not disassemble the monitor or cuff.
If in need of repair, refer to the warranty
section of this manual.
9. Do not subject the monitor to extreme
shocks (do not drop on floor).
10. Do not inflate the cuff unless wrapped
around wrist.
11. Do not wrap the cuff around body parts
other than your wrist.
12. Do not drop or insert any object into
any opening.
13. This monitor may not meet its
performance specifications if stored
or used outside of these temperature
and humidity ranges:
• Storage Environment • Operation Environment
Temperature:
14°F~140°F
(-10°C~60°C)
Humidity:
10~90% RH max.
Temperature:
50°F~104°F
(10°C ~40°C)
Humidity:
40~85% RH max.
BPW-101IB_ENGSP.qxd 10/24/05 11:14 AM Page 29