Health O Meter 2000KL Scale User Manual


 
2
CAUTION AND WARNING
To prevent injury and damage to your scale, please follow these instructions very carefully.
To ensure proper operation of the ProPlus® Stretcher Scale, this operation manual should be
reviewed carefully before operation. Keep this manual available for future reference, and also
for use in the orientation of new personnel.
If the scale becomes damaged, it should not be operated until properly serviced. All repairs
should only be performed by authorized Healthometer® Professional service personnel.
This scale is designed for static weighing of patients only. No scale should be used for
patient transfer. Healthometer® Professional / Pelstar LLC assumes no responsibility
for patient injury or scale damage should this caution be ignored.
Do not leave patients unattended while on the scale.
For accurate weighing the scale must be placed on a flat and stable surface with the locking
screw locked properly and the weighing mechanism not touching the floor.
For accurate weighing, verify proper operation according to the procedure described in this
manual before each use.
Do not use in the presence of flammable materials.
Operating at other voltages and frequencies than specified could damage the equipment.
If the “LOW BAT” indicator activates, for accurate weighing, replace the batteries or connect
the scale to an AC power source as soon as possible.
Failure to comply with the following will void scale warranty:
o Do not gas sterilize or autoclave the scale.
o Do not place liquids on top of the scale display console.
o Do not exceed recommended weigh limit of 400 lb/181kg for this
scale.
o This scale contains delicate sensors. Do not bang into doors,
elevators, etc., as damage may result.