Filter
Top Products
Page 9For technical questions, please call 1-800-444-3353.SKU 67437
Securely tighten the bolt and locknut, 4.
securing the Wheel Lock to the
frame.
Repeat the above steps until BOTH 5.
Wheel Locks engage the lock shoe
at least an 1/8” into the tire when the
Wheel Lock handle is pulled, and
HOLDS the occupied Wheelchair in
place when used.
If the 1/8” measurement cannot be 6.
reached, contact a qualied service
technician.
MAINTENANCE AND
SERVICING
Procedures not specically
explained in this manual
must be performed only by a
qualied technician.
TO PREVENT
SERIOUS INJURY
FROM WHEELCHAIR
FAILURE:
Do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
Cleaning, Maintenance, and
Lubrication
BEFORE EACH USE,1. inspect the
general condition of the Wheelchair
Check for loose hardware,
misalignment or binding of moving
parts, cracked or broken parts, and
any other condition that may affect
its safe operation. DO NOT USE A
DAMAGED WHEELCHAIR.
BEFORE EACH USE,2. examine the
Wheel Locks for proper operation.
Make sure to adjust both Wheel
Locks evenly. DO NOT USE A
WHEELCHAIR WITH DAMAGED
OR MALFUNCTIONING WHEEL
LOCKS.
Keep the rubber Rear Wheels free 3.
of oil grease, dirt and debris at all
times.
To clean: 4. Wipe with clean, warm
water and a mild detergent. Then dry.
Do not use solvents.