Filter
Top Products
SKU 47591 Page 5
1. Layout all the parts and components on a large, clean work surface.
2. Mount the Outrigger Support (29) to the Hitch Adapter Plate (34) using two Bolts (1),
Washers (11), and Lock Nuts (12). See Photo A.
3. Mount each Outrigger Assembly Arm (28) to the Outrigger Support (29) using Bolt (4),
Washer (11), and Lock Nut (12). See Photo B.
4. Mount the Guide Arms (32) to the Pivot Tube (31) at the center using Bolt (7), Washer
(11), and Lock Nut (12). Attach Bolts (10), Washers (11), and Lock Nuts (12) on each
side of the Pivot Tube (31). See Photo C.
5. Mount the Lifting Arm (33) to the Pivot Tube (31) using Bolt (9), Washer (11), and Lock
Nut (12).
Caution: Avoid pinching fingers between the Lifting Arm and the Pivot Tube.
6. Mount the other end of the Lifting Arm (33) to the Hitch Adapter Plate (34) using Bolt
(9), Washer (11), and Lock Nut (12). See Photo C on the previous page.
7. Mount the other ends of the Guide Arms (32) to the inside of the Outrigger Support
(29) using Bolts (7), Washers (11), and Lock Nuts (12). Use Bolts (10), Washers (11),
and Lock Nuts (12) on the outside of the Outrigger Support (29). See Photo B on the
previous page.
REV 08/02
(34)
(29)
(11)
(12)
(1)
(1)
(28)
(28)
(4)
(4)
(32)
(32)
(29)
[A]
[B]
(9)
(11)
(12)
(10)
(10)
(11)
(12)
(11) (12)
(33)
(31)
(7)
(11) (12)
(10)
(11) (12)
(11) (12)
(32)
[C]
(34)
(33)