Filter
Top Products
SKU 47591 Page 4
2. Always deploy the Outrigger Assembly Arms when using the Hitch Lift.
3. Place the load in the center of the lift platform and secure with the Deck Tie-down
Straps.
4. Make sure the vehicle battery is fully charged before using the Hitch Lift.
5. Never use to raise or lower people.
6. Do not move the vehicle with the Deck Plate (19) extended and loaded.
7. When operating, extend the Pistol Grip Trigger cord, and stay clear of the lift when
raising or lowering load.
8. Do not allow children to operate the lift.
9. Only use the Hitch Lift and Motorized Cable Module for its intended purpose.
10. Replace the Lift Cable if it becomes kinked, frayed, or cut.
11. Periodically check all nuts, bolts, and electrical connections for tightness.
12. Periodically clean all Hitch Lift parts of dirt and grime.
13. Never allow slack in the Lift Cable.
14. If a problem occurs with the Hitch Lift loaded, immediately lower the lift to the ground,
and remove power, before attempting to correct the problem.
Unpacking
When unpacking, check to make sure the following parts are included. (Numbered items
refer to the Parts List.) If any parts are missing or broken, please call Harbor Freight Tools
at the number on the cover of this manual as soon as possible.
Assembly
During assembly it will be necessary to refer to the Assembly Drawing located at the end of
this manual.
REV 08/02
(28)
(9, 8, 7)
(10)
(15)
(1, 4)
(2)
(25)
(18)
(20)
(6, 13, 14)
(31)
(33)
(29)
(30)
(30)
(34)
(27)
(32)
(32)
(17)
(24)
(23)
(19)