Filter
Top Products
14
SETUP
Setup mode allows viewing and modifying the instrument parameters.
To enter setup press ALT+SETUP keys when
the meter is in measurement mode.
“Set” is displayed on the primary LCD.
The secondary LCD displays the code of the current setup item.
Select the desired setup item using the ARROW keys. Press CFM to confirm.
Note: If ALT+SETUP keys are pressed before item confirmation, the meter
exits SETUP mode and returns to measurement mode.
Once the desired setup item has been selected, its current value starts blinking
(if it is a changeable parameter).
Press the ARROW keys to change the value.
Press RANGE. The other item will start blinking (e.g. month in setting up the
correct date).
Press the ARROW keys to change the value.
Press CFM to confirm.
ALT SETUP
OR
CFM
OR
RANGE
CFM