Filter
Top Products
16
By repeatedly pressing RANGE, GLP data is displayed in the following
order:
Last calibration date:
Last calibration year:
Last calibration time:
Cell constant value (K):
Offset value:
This information is displayed only if the last calibration was performed at 0.00 µS.
Calibration solution used:
If the cell constant was changed after calibration (through the “CEL” setup
function), this information is not displayed.
For NaCl GLP, the last parameter is not the nominal value of the calibration solution
but the actual conductivity and the temperature of the used calibration solution.
BUF
BUF
C
RANGE