Golden Technologies GP201SS Mobility Aid User Manual


 
Alante´ GP201 Manual Revised 060208
27
OPERATION Cont.
FREEWHEEL MODE
To disengage the gears and put your power chair in freewheel mode,
turn the brake release levers outward. See Figure 26.
To re-engage the gears and take your chair out of freewheel mode,
turn the levers rearward. See Figure 27.
Figure 26 Figure 27
1. Never put your power chair in freewheel mode when it is on a
slope or incline of any type.
2. Never put your power chair in freewheel mode while you are
operating your power chair.
3. Never put your power chair in freewheel mode without a
trained attendant present.
THERMAL ROLLBACK
Your Alante´ is equipped with a safety system. A microprocessor
monitors the operating temperatures of the joystick controller. In the
event of excessive heat occurring in the joystick controller, the joystick
controller will decrease the speed of your chair. This is done to reduce
the load on the electrical system and allow the components to dissipate
heat. The joystick controller will automatically set the chair’s speed back
to full normal when the operating temperature returns to normal levels.