Filter
Top Products
Alante´ GP201 Manual Revised 060208
20
COMFORT SETTINGS
You may be spending a great deal of time on your Alante´
™
. To provide you
with the maximum seating comfort, Golden Technologies, Inc. has designed this
power chair to incorporate the following adjustments for operator comfort.
COMFORT SETTINGS
1) Seat height 4) Footrest height
2) Armrest angle 5) Footrest extending
3) Footrest angle 6) Joystick controller length
Make certain that the power to your Alante´
™
is turned off
before making any adjustments, to eliminate the risk of the joystick
controller being accidentally bumped and activating the power chair.
SEAT HEIGHT ADJUSTMENT
1) Remove the seat.
2) Remove the shroud
3) Disconnect the joystick controller.
4) Use two wrenches to remove the nut, washers and bolt that secures
the seat post in place.
5) Adjust the inner seat pedestal to the desired height
6) Insert the bolt through the matching holes in the seat post and the
seat post pedestal.
7) Install the washers removed in Step 4.
8) Install and tighten the nut removed in Step 4.
9) Connect the joystick controller
10) Replace the shroud.
11) Attach the seat.
The Alanté seat
post height can be
adjusted by
moving the
location of the bolt
and washers in
the seat post as
shown at left.