LiteRider PTC_Owner’s Manual Rev A_121911
VII. OPERATION
Maximum Speed/Profile Indicator Flashes
This indicates the speed of the wheelchair is being limited for safety reasons. Contact
your Golden Technologies representative
NOTE: The VR-2 modules are not user serviceable. Do not attempt to repair VR-2
modules.
FREEWHEEL MODE
♦ To disengage the brakes and put your power chair in freewheel mode, push the
freewheel levers down. See figure 16.
♦ To re-engage the brakes and take your chair out of freewheel mode, pull the freewheel
levers up. See figure 17.
Never put your power chair in freewheel mode when it is on a slope or
incline of any type.
Never put your power chair in freewheel mode while you are operating
your power chair.
27
Freewheel Drive
Figure
1
6
Figure
1
7