Filter
Top Products
LiteRider PTC_Owner’s Manual Rev A_121911
IV. ASSEMBLY
Before operating or assembling your LiteRider PTC, be sure to remove the battery deactivate
strip and connect the joystick cable to the VR2 controller. Your LiteRider PTC will not power
up or operate without completing these steps.
1. Remove the battery pack by pulling up on the handle and remove the battery deactivate
strip. See figure 2.
2. Connect the joystick control to the VR2 power module. See figure 3.
Be sure the joystick cable is securely attached to the unit and
that the cable is not able to trail on the ground or become entangled on any
surrounding objects while the unit is in use.
The LiteRider PTC battery pack weighs 25 pounds. The seat with
arms weighs 22 pounds. Removal of arms will reduce the weight of the seat. Please
ask for help if you do not feel capable of safely lifting that much weight.
12
Figure
2
Figure
3