Filter
Top Products
Avenger Owner’s Manual Revised 06/04/08
CARE AND MAINTENANCE
Charger and Batteries
To Charge the Batteries:
1. Make certain your key is in the “OFF”
position.
2. Remove charger from pouch on the back
of the seat.
3. Plug the charger AC cord into a working
electric outlet and the 3-pin DC plug
into the back of the tiller
Note: A red and amber “LED” light should
now Illuminate, showing the batteries are charging.
4. When the charging cycle is complete the amber L.E.D. will turn green
indicating a complete charge.
5. Unplug and stow the charger into the seat pouch.
Simple Tips:
• Check the battery connections.
• It may be necessary to have the batteries “load tested” by your dealer.
• It may be necessary to have the charger tested.
The Batterys are under the rear
shroud. The charger is located
in the pocket on the back of the
scooter seat.
To charge the batteries, plug the
charger into the tiller and the
other end into a standard wall
outlet.