Filter
Top Products
12
Chapter 3: Getting Started
Unpacking the Enclosure
Carefully remove the shrink-wrap or carton on the enclosure and
inspect it for damage that may have occurred in transit. If
damaged, notify the delivery carrier immediately and retain the
entire shipment intact for inspection by the carrier.
DO NOT RETURN GOODS WITHOUT THE
PRIOR AUTHORIZATION OF LABCONCO.
UNAUTHORIZED RETURNS WILL NOT BE
ACCEPTED.
IF ENCLOSURE WAS DAMAGED IN TRANSIT,
YOU MUST FILE A CLAIM DIRECTLY WITH
THE FREIGHT CARRIER. LABCONCO
CORPORATION AND ITS DEALERS ARE NOT
RESPONSIBLE FOR SHIPPING DAMAGES.
Do not discard the packing material until you have checked all of
the components and tested the enclosure.
We recommend that you do not remove the enclosure from its
shipping container until it is ready to be placed into its final
location. Move the unit by placing a flat, low dolly under the
shipping skid, or by using a floor jack.
Do not move the enclosure by tilting it onto a
hand truck.
Installing the Filtered Enclosure
on a Supporting Structure and
Work Surface
Use caution when lifting or moving the enclosure.
When installing the enclosure onto a chemical-resistant work
surface or benchtop, ensure that the structure can safely support the
combined weight of the enclosure and any related equipment. The
work surface should be at least as wide as the enclosure to properly
support it. The front of the enclosure should be aligned within
The United States
I
nterstate Commerce
Commission rules
require that claims be
f
iled with the delivery
carrier within fifteen (15)
days of delivery.
!
☞
☞