Filter
Top Products
9105/9107 49
9 Digital Communication Interface
Command Description
Command
Format
Command
Example Returned
Returned
Example
Acceptable
Values
These commands are only used for factory testing.
Read software cutout mode *sco *sco sco: {ON or OFF} sco: ON
Set software cutout mode: *sco=ON/OF[F]
ON or OFF
Set software cutout mode on *sco=ON *sco=on
Set software cutout mode off *sco=OF[F] *sco=off
Miscellaneous (not on menus)
Read firmware version number *ver[sion] *ver ver.9999,9.99 ver.9105,3.54
Read structureof all commands h[elp] h list of commands
Legend: [] Optional Command data
/ Alternate characters or data
{} Returns either information
n Numeric data supplied by user—may be entered in decimal or exponential notation
9 Numeric data returned to user
x Character data returned to user
Note: When DUPLEX is set to FULL and a command is sent to READ, the command is returned followed by a carriage return and linefeed. Then the
valueisreturnedasindicated in the RETURNED column.
Communications Commands Continued