Filter
Top Products
4 Quick Start
This section briefly explains the basics of setting up and operating your 1521
Thermometer.
4.1 Unpacking
Carefully unpack the 1521 and accessories and inspect them to make sure all
components are present and in satisfactory condition. Verify that the following
items are present:
•
1521 Thermometer
•
AC Adapter (clamp-on ferrite installed)
•
Serial Cable
•
User’s Guide
• Report of Calibration
• Calibration Label
• Pass-code Notice
• INFO-CON Connector
• Clamp-on ferrite with instructions for probe
• Probe (optional—must be purchased separately)
If all items are not present, call an Authorized Service Center (see Section 1.3).
4.2 Use Proper Care with the 1521 and Accessories
First and most important is to understand the safety issues related to the 1521
and its accessories. Be aware that potential hazards exist due to high tempera
-
tures, high voltages, and battery chemicals. Carefully read Section .
CAUTION: The 1521 and any thermometer probes are sensitive instru
-
ments that can be easily damaged. Always handle these devices with care.
DO NOT allow them to be dropped, struck, stressed, or overheated.
4.3 Learn About the Features and Components
Familiarize yourself with the features and accessories of the 1521 by reading
Section 5.
4.4 Connect the Probe
The PRT or thermistor probe connects to the top of the 1521 using Hart’s
unique INFO-CON probe connector. The probe connector is inserted into the
11
4 Quick Start
Unpacking