Filter
Top Products
9
10
CONSUMER AFFAIRS
YOUR SAFE’S UNIQUE IDENTIFICATION NUMBERS
When contacting Consumer Aairs, you should be prepared to supply some
important information that specically identies your safe. This information is
extremely important to assuring prompt and accurate customer assistance.
It is strongly recommended that you identify and record the following information
in the Safe Identication Record form located on page 12.
LOCATING MODEL AND SERIAL NUMBERS
Most First Alert® safes include a small metallic silver or gray tag axed to one of
the surfaces. This tag is usually located on the front or right side of the safe. This
tag contains the serial number and on selected models a similar tag is attached
containing the model number. If a model number tag is not attached to the safe,
then it can be located on the front or side panel of the box that the safe was
packaged in. Write this number down for future reference.
KEY NUMBER
The key number is located on
the key. If you do not have the
key, the number is also located
on a sticker on the inside of the
emergency override key
lock cover.
.
IMPORTANT
DO NOT REMOVE TAGS
In case your safe becomes inoperable or you lose your keys, these identication
numbers will be needed to correct the problem. It is recommended that the
number tags remain in place on the safe. If removal is necessary, then they
should be attached to the inside back cover of this manual. Store in a safe and
secure place for future reference.
Moisture Warning
We recommend that you place delicate items such as pictures or
intricate jewelry into an air-tight container before storing them in your
safe. Avoid placing your safe in areas of high humidity. For optimum
performance, the safe should be opened and aired out for at least 20
minutes every two (2) weeks.
Firearms Warning
This safe is not designed to store medication, items with combustible
content, guns or other weapons.
Pearls
Because pearls sustain heat damage at temperatures below 350° F, we
advise that you DO NOT store pearls in this re safe.
SAFE CARE AND MAINTENANCE
When properly maintained, your safe will continue to operate accurately for many
years. In order to ensure optimum performance of your safe, please follow these
simple precautions:
Battery Maintenance
1
Always purchase and use the batteries as specied by this User’s manual.
2
Always replace all batteries at the same time. It is recommended to replace all
batteries at least once a year or sooner depending on amount of use.
3
Always clean the battery contacts in the battery compartment and on the
batteries before installing new batteries.
4
Always make sure all batteries match the polarity (+ and -) signs in the open
battery compartment.
5
If your safe will not be used for an extended period of time, it is recommended
that you remove the batteries.
6
Always promptly remove and properly discard of all used batteries.
Clean Hands - Never attempt to operate the digital keypad if your hands have
excessive dirt, debris or liquids on them.
Clean Safe – To clean the surface of your safe, it is recommended that you use a
mild cleaner (e.g., window cleaner) to avoid scratching or discoloring the surface.
Always wipe dry and NEVER use abrasive cleansers on the safe or digital keypad.
Waterproof – Your new First Alert® Digital Waterproof Fire Safe with
Ready-Seal™ is designed to help protect your valuables from re and
water. This product has been validated to be waterproof when fully
submerged for up to 1 hour and is not intended for long term underwater
exposure.
For future reference, store this manual in a secure area away from the safe.
DO NOT DISCARD!
Use Care and Maintenance Consumer Aairs
L-10-XZ
L-10-XZ
L1234
1
4
7
2
5
8
0
3
6
9
#
MODEL NUMBER SERIAL NUMBER KEY NUMBER
1
HOUR