Filter
Top Products
EXCELL PRECISION CO., LTD.
FM User Manual SME300000119
33
2 Command Mode
Command
Function Command
Function
READ, RW
Weight Reading CT Tare Clearing
ZERO, MZ
Weight Re-zeroing Rl Weight Accumulation
TARE, MT
Gross Weight Reducing
Rm Times Accumulation
NTGS Gross / Net Switch Rn Date
MG Gross Weight Indicating
Ro Time
MN Net Weight Indicating AT
Weight and Times
Accumulation
DT
Weight and Times
Accumulation Clearing
Œ After setting the commands mentioned above, it’s necessary to add the termination
code “CR(0DH) and LF(0AH)”.
• If the command is not correct, it will reply “E” + “Command Unidentified”.
Ž If setting command mode with address (RS1-06 = 4), add “@ address” in front of each
command.
Example: When RS1-08 = 1, for reading weight value, the whole complete command
should be “@01RW(CR)(LF)”.